CHL, CHLK, CHLF (T) Lightweight Horizontal Multistage Centrifugal Pump
Product Overview
Horizontal multistage non-self-priming centrifugal pump equipped with an extended-shaft motor.
The compact design results in a small pump size with an axial inlet and radial outlet.
Product Parameters
Technical Parameters
● Flow Rate Range: 0.5 m³/h to 28 m³/h
● Head Range: 5 m to 60 m
Electrical and Mechanical
The motor is a fully enclosed, air-cooled two-pole motor
● Protection Rating: IP55
● Insulation Class: F
● Standard Voltage: 50 Hz: 1×220–240 V
3×220–240 V/380–415 V
● Maximum Power for Single-Phase Motor: 2.4 kW
Operating Conditions
● Liquid Temperature: Standard Type: -15°C to +70°C
Hot Water Type: -15°C to +105°C
● Maximum Ambient Temperature: +40°C
● Maximum Operating Pressure: 10 bar
● Maximum Inlet Pressure is limited by the maximum operating pressure
Conveyed Liquid
● Thin, clean, non-flammable, non-explosive liquids free of solid particles or fibers
● The pump can handle liquids such as mineral water, softened water, pure water, light oil, and other light chemical media
● When the density or viscosity of the liquid being pumped exceeds that of water, a high-power motor must be used if necessary
● Whether the pump is suitable for a specific liquid depends on various factors, the most important of which are chlorine content, pH value, temperature, and the presence of solvents or oils
Applications

CHL, CHLK, and CHLF(T) type pumps are primarily used in industrial applications:
● Air conditioning systems
● Cooling systems
● Industrial cleaning
● Water treatment (water purification)
● Aquaculture
● Fertilization/metering systems
● Environmental applications
● (Other)
Many specialized applications
Material ● Stainless steel